|
|
Last  on
(Click on any picture to see the larger version)
All pictures are © zetecinside.com™ including the Zetec Inside™ logo
Installing the seat
I started out with a Cobra Imola2 seat, made from diolin, attached to the reinforced floor with aluminium 5mm brackets. However, it soon became apparent that the seat was too narrow for my frame, so I've replaced it with a Motordrive seat, made from a carbon/composite material, which is tailer made to suit me. It is still mounted on 5mm brackets, also supplied with the seat.
--> Next picture gallery
|
